BTC HOME PAGE
Our Model Line
Prices subject to
change
|
COMMERCIAL
SYSTEMS
The commercial systems are our best value.
Each commercial
system comes complete with the Cyclone model as described above, with USA made,
all cast aluminum Blower equipped with a Franklin Electric motor.
The Blower housings are cast aluminum and the outlet can be oriented in
the direction your shop layout dictates. The
impellers are 8- and 9-bladed cast aluminum designs with excellent airflow and
are statically and dynamically balanced. These
are the highest efficiency units designed for use with a plenum and filter
tubes. The filter tubes are made by
Apel International, and have been tested by an independent lab to ½ micron.
They achieve this level of filtration with far fewer square feet of
filter area because they are non-woven. This
means fewer tubes taking up room in your shop.
3 tubes are included with a 102, and 4 tubes with a 103.
The plenum is easily constructed using ½” plywood and all hardware is
included.
Click on the model name in the table to go to a page with pictures.
|
|
| MODEL |
HP
|
CFM
|
MAX SP |
VOLTS |
CYCLONE
SIZE |
INLET |
OUTLET |
PRICE |
| BTC
102 |
2 |
1370 @ 2.5”ws
1080 @ 8”ws |
10.5 |
230; or
208-230/460.3Ø |
76”
x 19” |
6" |
7" |
$1395.00 |
| BTC
103 |
3 |
2180 @ 2.5”ws
1495 @ 8”ws |
11.2 |
230; or
208-230/460.3Ø |
79”
x 20.5” |
7" |
8" |
$1825.00 |
| BTC105 |
5 |
2650 @ 3.5”ws
2165 @ 8”ws |
|
230-460,3Ø |
|
10" |
|
$3995 |
| BTC110 |
10 |
3890 @ 3.5”ws
3025 @ 10”ws |
|
230-460,3Ø |
|
12" |
|
$5275 |
| BTC125 |
25 |
7900 @ 5”ws
6465 @ 14”ws |
|
230-460,3Ø |
|
16" |
|
$11,025 |
RETROFIT
SYSTEMS
The commercial systems described above are the complete packages (which
includes the Blower, motor, pedestal and filter assemblies).
Blue
tornado also makes components which can be purchased separately to retrofit with
your existing blower:
MODEL 102
This unit is designed to be used with our 2
horsepower Blowers and filtration kit for the best small shop system available,
the 102 Commercial. It has been
purchased independently by some of
our customers to mate with their import 1.5-3 HP chip collectors to create an
entry-level dust management system.
MODEL 103
We
sell this Cyclone for use with our 3 horsepower industrial Blower system (or
retrofit with 3-7.5 hp imports). This
unit also comes complete with Cyclone, legs, drum and connection kit.
SPECIFICATIONS
| MODEL |
HP
|
CFM
|
CYCLONE
SIZE |
INLET |
OUTLET |
PRICE |
| 102
Comm. |
1.5 - 2.5 |
550-1350 |
76”
x 19” |
6" |
7" |
$625.00 |
| 103
Comm. |
2.5 - 4.5 |
1200-2300 |
79”
x 20.5” |
7" |
8" |
$695.00 |
TYPICAL
INSTALLATION
Workshops
are as individual as the craftspeople that use them, so every installation is
different. We offer FREE assistance
in planning your shop layout. We
also sell the fittings you will need for a good system.
When thinking about your layout, remember that the most efficient system
is one that sucks the dust through the Cyclone rather than blowing it through.
Some of our industrial customers do mount their Cyclones over dumpsters
and mount their Blowers on the ‘dirty air’ side.
Our Cyclones are raw steel on the inside to allow for electrical
grounding purposes. Blowers come
with TEFC motors, but our recommendation, as with any electrical device, is to
always protect your system from exposure to the elements.
SHIPPING
INFORMATION
Model
102 Cyclone retrofit (Cyclone and drum) is shipped via UPS.
The average shipping cost in the US is approximately $65.00.
All other products are shipped via common carrier, or the carrier of your
choice, with average shipping charges of $130.00.
Once an order is placed, please allow 6 to 8 weeks for delivery.